Max ER-1500 Instruction Manual page 11

Specific Setting Procedures
1. Setting Machine Mode (Code No: 01)
Press the or
Pay Period
Monthly
Weekly
Bi-weekly
1. The time is printed only in 24-hour format.
2. When setting in the Laid Down Position, only 24-hour format is displayed.
2. Setting Pay Closing Date (Code No: 02)
After setting "Machine Mode," "Pay Closing Date" is shown on the display.
Monthly
Press the or
desired closing date, press the "SET" key.
from
Weekly
Press the or
When the display shows the desired closing date, press the "SET" key.
from
Bi-weekly
Press the or
When the display shows the desired closing date, press the "SET" key.
from
key to select the desired "Machine Mode" from the following table.
12/24-Hour Format
12H
24H
12H
24H
12H
24H
key to select the Pay Closing Date. When the display shows the
to
key to select the Pay Closing Date (from today to the next 6 days).
to
key to select the Pay Closing Date (from today to the next 13 days).
to
Machine Mode
1
2
3
4
5
6
- 10 -