Max ER-1500 Instruction Manual page 5

◆ Do not drop or hit the instrument.
◆ Install this instrument away from the following places:
1. Any place that is not level or that is subject to vibration.
2. Any place that has dust or high humidity. Keep beverages and
liquid containers away from this instrument.
3. Any place that the temperature goes below 0
40 /104 .
4. Any place that catches direct sunlight or is located close to a
heat source.
◆ Do not insert cards or paper other than the specified time cards for
this instrument. Do not use time cards that are bent or torn.
◆ Be sure to use a dry cloth for cleaning. Do not use solvents
(alcohol, benzene, thinner, etc.) or a damp cloth.
◆ Do not re-ink cartridge. Replace with ink ribbon cassette ER-IR100
or ER-IR100E.
◆ Do not hang this instrument on a wall using anything other than the included plate for wall
mounting.
◆ The socket outlet should be installed near the instrument and be easily accessible.
◆ A 7-minute break is required after continuous printing 150 times.
/32 or over
- 4 -