Error Codes; Caution Code - Max ER-1500 Instruction Manual

ERROR CODES

Error codes
Time card is not inserted far
enough to where automatic feed
activates.
Time card is inserted on the
wrong side.
ER-1500 cannot read holes on
time card correctly.
● 4 printings have been already
● Improper print was made by
150 or 50 time cards have been
already inserted in a day/month.
When setting ER-1500, invalid
value is input.
Automatic feed does not carry
time card smoothly.
Printer malfunction.

CAUTION CODE

Caution Code
Problem
completed in a day.
manual operation.
Problem
When you try to revise Machine
Mode, Pay Closing Date, Date,
LST, 60/100 scale or Daily Total
Time, all time data is deleted.
Insert time card to where automatic feed
starts.
Insert time card on the other side.
Check if any holes are covered.
Check if time card is bent or damaged.
(ER-1500 can handle up to 150 or 50 time
cards a day/month.)
Input correct value.
Do not hold time card during printing.
Check if time card is bent or damaged.
Try to get normal printout by disconnecting
or connecting the power cord.
If you press "SET" key
All time data is deleted and the
revised data is registered.
If you press "CANCEL" key
The revision is canceled without
deleting time data.
- 20 -
Solution
Solution