Error Codes; Caution Code; Trouble Shooting - Max ER-1600 Instruction Manual

ERROR CODES

Error codes Problem
Time card is not inserted far
enough to where automatic feed
activates.
Time card is inserted on the
wrong side.
ER-1600 cannot read holes on
time card correctly.
4 printings have been already
completed in a day.
Improper print was made by
manual operation.
150 or 50 time cards have been
already inserted in a day/month.
Time card used last month is
inserted.
When setting ER-1600, invalid
value is input in IN-OUT or DST.
Automatic feed does not carry
time card smoothly.
Printer malfunction.
Solution
Insert time card to where automatic feed
starts.
Insert time card on the other side.
Check if any holes are covered.
Check if time card is bent or damaged.
(ER-1600 can handle up to 150 or 50 time
cards a day/month.)
Insert a new time card.
Input correct value.
Do not hold time card during printing.
Check if time card is bent or damaged.
Try to get normal printout by disconnecting
or connecting the power cord.
- 21 -

CAUTION CODE

Caution Code Problem
When you try to revise Machine
Mode, Pay Closing Date, Date,
LST, 60/100 scale or Daily Total
Time, all time data is deleted.

TROUBLE SHOOTING

Never disassemble the instrument by yourself.
Contact your dealer or distributor if you could not solve the problem after
checking the following table.
Problem
No display Is the power cord connected to the plug socket correctly?
No print out on time card Is the ink ribbon cassette inserted correctly?
Card insertion obstructed
Is the card being inserted on the correct side?
Is the card bent or damaged?
Deviation in the printing
Is the card being inserted too strongly?
line position
Do you pull out the card during the printing process?
Do you keep holding the card when it is automatically being
pulled inside?
Is the card damp?
Faint printout
Is the ink ribbon being used too long?
Is the ink ribbon cassette inserted correctly?
Solution
If you press SET key
All time data is deleted and the
revised data is registered.
If you press CANCEL key
The revision is canceled without
deleting time data.
CAUTION
Points to Check
- 22 -
See