Stopwatch; Remote Control - BMW On-Board Computer Operating Instructions Manual

Stopwatch

86n
Starting and stopping
To time the journey between the start-
ing point and the destination:
1. Select "Timer"
2. Select .
The stopwatch is started and the
mark changes to .
The time elapsed is displayed alongside
the "Timer" function.
To stop the time, select the marked
symbol.
Taking an interim time reading
Select .
The interim reading is shown at the
right. The stopwatch continues to run.

Remote control

The computer information can be called
up in the display on the instrument
panel by using the button in the turn in-
dicator lever, if the ignition key is in po-
sition 1 or beyond. Each time the button
is pressed briefly towards the steering
column, another function is called up
(according to the computer's settings).
The displays may include the following:
> Time
> Average fuel consumption (1 and 2)
> Range
> Limit
> Distance
> Arrival time
> Average speed
> Date
> Stopwatch.
Online Edition for Part No. 01 41 0 156 676 - © 01/02 BMW AG