Starting And Stopping A Cd - BMW On-Board Computer Operating Instructions Manual

CD changer
*
62n
Operating temperatures
Only use the CD changer at tem-
peratures between –15 6 and
+60 6, otherwise it may malfunction.
Even when switched off, the unit should
not be exposed to temperatures be-
yond – 25 6 or +85
6.<
Atmospheric humidity
A high level of humidity inside the de-
vice may cause the laser beam focusing
lens to fog over and prevent the CD
from being played.
Precautions when using laser
equipment
The BMW CD changer is officially a
Class 1 laser product.
Do not remove the cover from the
housing. Never run the device if its
cover is damaged. Otherwise the invisi-
ble laser beam could cause serious eye
injuries.
Repairs or maintenance work must only
be carried out by qualified service ex-
perts.<

Starting and stopping a CD

Starting
1. Switch on the radio, see page
2.
Press as often as necessary until the
operating display for CD appears.
If replay was previously interrupted, it
will begin again at the same point af-
ter a few seconds.
If the CDs in the magazine have
been changed, the CD in the low-
est compartment occupied starts to
play first, e.g. CD 1, track 1.<
If you play CDs that you have re-
corded yourself, malfunctions
such as pauses may occur.<
Stopping
Switch off the radio, see page
48
or
Press as often as necessary until the
control line changes to the desired au-
dio source (cassette or radio).
The audio source switches directly to
> Radio, see page
> Or, if there is a cassette in the slot,
to cassette, see page 59.
Online Edition for Part No. 01 41 0 156 676 - © 01/02 BMW AG
48
48