Starting And Stopping Cassette; Reminder Displays - BMW On-Board Computer Operating Instructions Manual

Starting and stopping cassette

Starting
1. Switch on the radio, see page
2.
The front panel is lowered
3. Push the tape cassette fully into the
slot with the tape openings at the
right.
The front panel is then automatically
raised again. "TAPE 1" appears on
the screen.
The front panel has a trap protec-
tion feature. It automatically stops
if it encounters an obstruction while
moving back into its home
If there is already a tape cassette in the
slot:
To start cassette play
Press as often as necessary until
"TAPE 1" is displayed
Change to the other side if necessary
Stopping
48
The front panel is lowered and the cas-
sette is ejected part way out of the tape
slot
or
Switch off the radio, see page
or
Press as often as necessary until the
control line changes to the desired au-
dio source (radio or CD changer
The audio source changes directly to
> Radio, see page
> Or, if there are CDs in the magazine,
position.<
to CD replay, see page 61.

Reminder displays

TAPE ERROR
The tape in the cassette in the slot can-
not be moved.
To avoid the risk of damage:
Press until the cassette is ejected and
remove the cassette from the tape slot.
48
Turn one of the reels e. g. with the aid of
a ballpoint pen, to take up any tape
slack.
Insert the cassette in the tape slot again
and wind the entire tape once in each
direction, to make sure tape is wound
*
).
evenly.
If this message appears on the screen
48
again, the cassette in question should
no longer be used.
TAPE CLEAN
This message appears twice in succes-
sion when a cassette is inserted, after
50 hours of operation. It simplifies esti-
mating the time intervals between
cleaning operations. Care of cassettes,
see the brochure "Looking after your
car".
Online Edition for Part No. 01 41 0 156 676 - © 01/02 BMW AG
59n