Advertisement
USER PAGE can be customized as desired.
USER PAGE created on a PC is uploaded by FTP.
Set the unit so that NETWORK SETUP can be displayed. ( page 30)
Create HTML on the PC using a commercially available HTML editor, etc.
Save the created HTML file under the name of "index.html".
Use a commercially available FTP program on the PC to upload index.html created in step 2 above to KA-DV5000.
FTP program settings
IP Adress
: 192.168.100.101 (Input the actual IP address used.)
Remort Port : 21
USER ID
: html
PASSWORD : None
\ It is also possible to upload link pages from index.html, images, etc.
●
Make sure the uploaded files do not exceed 100KB in total.
●
The HTML display will fit properly on the screen when creating at a size of about 500 X 360 pixels.
12
Network related settings are made in the individual input setting screens.
Here, USER NAME is set as an example. Other settings are also made in the same manner.
STATUS
SHUTTER
MENU
SHUTTER
STATUS
dial
button
USER NAME input setting screen
Example: Changing USER NAME from jvc to jvc-1234
Currently inputted number of characters/
\
max.number of characters
● The USER NAME input setting screen appears.
Characters are selected from the character selection area on the bottom of the
screen.
Turn the SHUTTER dial to flash "_" in the character selection area and press the
SHUTTER dial.
● The setting changes to "jvc_" and the following digit of the setting area flashes.
Setting area
Character
Turn the SHUTTER dial to select "1" in the character selection area and press the
selection area
SHUTTER. dial.
BS: Backspace (delete previous character)
● The setting changes to "jvc_1" and the following digit of the setting area flashes.
: Return to menu screen
Repeat the above step to set "jvc_1234" in the setting area.
\ To delete or edit set characters, select "BS" within the character selection area and
press the SHUTTER dial.
The previous character will be deleted. The character on the left will be deleted each
time this operation is repeated.
\ The currently inputted number of characters and the maximum number of characters
are displayed on the upper right of the screen.
When completed, select " " within the character selection area and press the
SHUTTER dial.
● NETWORK SET [2/2] menu screen returns in the LCD or viewfinder.
OPEN
EDITSEARCH
MONITOR
FILTER
1
3200K
2
5600K
/
1 8
ND
.3
5600K
.4
5600K
/ ND
1 64
STATUS
SHUTTER
LCD BRIGHT
DISPLAY
MENU
AUDIO
LEVEL
OPEN
PULL
FRONT
AUTO IRIS
FULL AUTO
BLACK
LOLUX
CH-1
CH-2
REAR
CH-1
CH-2
BACK L
STRETCH
MODE
AUDIO INPUT
AUDIO SELECT
NORMAL
NORMAL
VTR
CH-1
CH-2
SPOT L
COMPRESS
CAM
AUTO
MANUAL
POWER
VTR
ON
OFF
13
Advertisement
