Advertisement
When using a LAN card, network related settings for KA-DV5000 are made using NETWORK SET of the NETWORK PACK CONFIG
menu. Settings will be stored in the KA-DV5000 memory even when turning the power off.
STATUS
SHUTTER
MENU
SHUTTER
STATUS
dial
button
POWER switch
\
TOP MENU screen
If OUTPUT CHAR of the OTHERS (1/2) menu screen is set to ON, the menu screen
also appears on the monitor screen connected to the MONITOR OUT or Y/C OUT
connector.
Turn on the GY-DV5000 and KA-DV5000 power.
NETWORK PACK CONFIG
Check to see that the card status display has changed from a flashing to constant
menu screen
display.
Press the STATUS button for about 1 seconds to display the TOP MENU screen.
Turn the SHUTTER dial, move the cursor (t) to NETWORK PACK CONFIG and
press the SHUTTER dial.
● The NETWORK PACK CONFIG menu screen appears.
Turn the SHUTTER dial, move the cursor (t) to NETWORK SET and press the
SHUTTER dial.
● The NETWORK SET [1/2] menu screen will appear.
NETWORK SET [1/2]
The NETWORK SET menu screen is structured by 2 pages.
menu screen
\
Select PAGE BACK in the NETWORK SET [2/2] menu screen and press the SHUT-
TER dial to return to the NETWORK SET [1/2] menu screen.
Set DHCP to ON or OFF in the NETWORK SET [1/2] menu screen.
Items other than DHCP are set in the individual setting screen. ( page 11)
To return to the normal screen after completing setting, perform one of the follow-
NETWORK SET [2/2]
ing operations.
menu screen
● Press the STATUS button
● Select PAGE BACK to return to the TOP MENU screen. Select EXIT in the TOP
MENU screen and press the SHUTTER dial.
OPEN
EDITSEARCH
MONITOR
FILTER
1
3200K
2
5600K
/
1 8
ND
.3
5600K
.4
5600K
1 64
/ ND
SHUTTER
STATUS
POWER SUPPLY
LCD BRIGHT
DISPLAY
MENU
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
switch
AUTO IRIS
FULL AUTO
BLACK
LOLUX
CH-1
CH-2
CH-1
CH-2
MODE
AUDIO INPUT
BACK L
STRETCH
AUDIO SELECT
NORMAL
NORMAL
VTR
CH-1
CH-2
SPOT L
COMPRESS
CAM
MANUAL
AUTO
POWER
VTR
ON
OFF
10
[1/2] screen
indicates default factory setting.
HOST NAME
Displays the host name input setting screen. (Max. 63 alphanumerical characters)
[Factory setting: none]
DHCP
OFF
Select whether DHCP server is used.
ON
OFF: Use this setting when using LAN connection rather than DHCP.
When this setting is used, IP ADDRESS and NETMAST, GATEWAY must also be set.
ON: Use this setting when using DHCP connection.
When using this setting, IP ADDRESS and NETMASK, GATEWAY are automatically set.
* When DHCP is set to ON, WLAN ADHOC MODE cannot be set to AHDM or IBSS.
IP ADDRESS
Displays the IP address setting screen.
When using LAN connection with DHCP set to OFF, this setting is required. Set a unique IP address.
IP ADDRESS setting is not available when DHCP is set to ON.
[Factory setting] 192.168.100.101]
NETMASK
Displays the subnet mask input screen.
This setting is required when using LAN connection with DHCP set to OFF.
NETMASK setting is not available if DHCP is set to ON.
[Factory setting: 255.255.255.000]
GATE WAY
Displays the gateway address input screen.
GATEWAY setting is not available when DHCP is set to ON.
[Factory setting: 192.168.100.254]
NEXT PAGE
Pressing the SHUTTER dial displays the NETWORK SET [2/2] menu screen.
PAGE BACK
Pressing the SHUTTER dial returns to the NETWORK PACK CONFIG menu screen.
[2/2] screen
RTSP
1
The screen for setting RTSP and HTTP port numbers appears.
:
Normally, the unit can be used without changing the factory settings.
8554
If there are port restrictions for the LAN environment of your PC, consult your network administrator.
:
* When changing a port number, refer to "5-1. Connecting with Camcorder" of the "Streamproducer"
32767
User's Guide of the network distribution software to change settings.
* Do not use the same port numbers for RTSP and HTTP.
HTTP
1
* When a port number is changed, switch the power of the GY-DV5000 off once, and then switch it
:
on again.
80
:
32767
WLAN AD HOC
OFF
Wireless LAN setting
MODE
AHDM
OFF:
Use this setting when performing communication via access point.
IBSS
AHDM/IBSS: Use this setting when performing communication in AD HOC mode with a PC con-
nected with a wireless LAN card. ( page 15)
* When this item is set to AHDM or IBSS, DHCP cannot be set to ON.
WLAN ESS-ID
Displays the wireless LAN ESS-ID input setting screen (Max. 32 alphanumerical characters)
WLAN WEP
When encrypting data, set the WEP KEY (10 characters consisting or letters a ~ f and numbers).
KEY
Must be compatible with access point authentication for the use of this item.
WLAN CH
1CH
Wireless LAN channel setting
2CH
:
14CH
USER NAME
Displays the user name input setting screen. (Max. 8 alphanumerical characters)
Used when controlling GY-DV5000 via LAN card. ( page 30)
[Factory setting: jvc]
PASS WORD
Displays the password input setting screen. (Max. 8 alphanumerical characters)
Used when controlling GY-DV5000 via LAN card. ( page 30)
[Factory setting: ka-dv5k] (Password is hidden)
• Keep a memo of the password since it is only displayed during the actual setting. The password
will be hidden using asterisks (*) when accessing the password menu screen again.
• When performing MENU RESET, ka-dv5k will return to its factory settings. ( page 9)
PAGE BACK
Pressing the SHUTTER dial returns to the NETWORK SET [1/2] menu screen.
11
Advertisement
