Operation Page - JVC 4ch Network Encoder VN-E4 Instructions Manual

Settings
(continued)

5-15 Operation Page

This page displays the operating status of VN-E4.
A
B
C
This page can be used upon access via AadminB or AoperatorB.
A Total Sending Bitrate
B Destination
C System Log
42
Displays the total bit rate sent by VN-E4, as well as the bit rates of ATCPB and AUDPB.
Displays the destination that VN-E4 is sending data to.
Displays the following information.
Time lapse (seconds) after startup, alarm log information, list of clients that is keeping TCP
connection for alarm, clients that are currently sending audio data to VN-E4, and pass-through
clients