Av Devices; Attaching Rack Mount Brackets; Connection With Pc - JVC 4ch Network Encoder VN-E4 Instructions Manual

Preparation
(continued)

4-6 AV Devices

AUDIO
IN 1CH
OUT
3CH
Connect up to 4 cameras to the 4 video input terminals at the rear panel of VN-E4. Output signals of each camera need not be
synchronized.
Connect a microphone to the audio input terminal at the rear panel of VN-E4 via amplifier.
Connect a speaker to the audio output terminal at the rear panel of VN-E4 via amplifier.

4-7 Attaching Rack Mount Brackets

The rack mount brackets (optional) can be used to install the unit to a rack. Request installation to the dealer of purchase.
* For details concerning the rack mount brackets, please consult the person in charge of professional equipment at your nearest
JVC-authorized service agent.
In case of 1 unit. (VN-BK10 rack mount bracket)
2.
In case of 2 units. (VN-BK11 rack mount bracket)
3.
4.

4-8 Connection with PC

Connect the PC to the switching hub using a straight LAN cable.
To operate the built-in viewer of VN-E4, set up the PC as follows.
[Recommended PC Specifications for Viewing]
OS : Windows XP Pro (SP2) or Windows XP Home (SP2)
CPU : For receiving at 30 fps: 1.5 GHz
Memory : 1 GB
Hard disk : Free disk space of 20 MB and above
: 1024 L 768 pixels or higher, True Color (24 or 32 bits)
Video card
Sound card : Sound Blaster (PCI)
Web browser : Internet Explorer V6.0
VIDEO INPUT
2CH
4CH
1.
1.
2.
2.
1.
3.
4.
2.
For receiving at 120 fps: 3.4 GHz
1.
Mount the side bracket on both left and right
(Remove 1 screw from each end of VN-E4. Fasten each
end using 1 M3 screw and 2 M4 screws that are supplied
with the rack mount bracket.)
2.
Fasten to the rack using the M5 screws supplied with
the rack mount bracket
(2 M5 screws at each end)
1.
Mount the joint bracket to the connecting face of the
unit
(Remove 3 screws from VN-E4. Connect with 3 M3 screws
that are supplied with the rack mount bracket.)
2.
Fasten the 4 locations (top and bottom) using the M3
screws supplied with the rack mount bracket
(For joining the left and right units)
3.
Mount the side bracket on both left and right
(Remove 1 screw from each end of VN-E4. Fasten each
end using 1 M3 screw and 2 M4 screws that are supplied
with the rack mount bracket.)
4.
Fasten to the rack using the M5 screws supplied with
the rack mount bracket
(2 M5 screws at each end)
19