Table of Contents
Advertisement
Directly typing in the address
To specify a destination that is not registered with the machine, directly type
in the address.
With [FTP]
1
In the initial Scan to Folder mode screen, press [Direct Input].
2
Press [FTP].
3
Specify settings for [Host Name], [File Path], [User Name] and [Password]
for the destination computer.
4
If necessary, specify settings for other parameters in the [Details] screen.
– [Pasv]: Select whether or not the PASV mode is used.
– [Proxy]: Select whether or not a proxy server is used.
– [Port No.]: Type in the port number. (Range: 1 to 65535)
5
Press [OK].
To specify multiple destinations, specify the various settings, press
[Next Dest.], and then specify the settings for the next FTP destina-
tion.
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to "[Security
Settings]" on page 3-70.
With [PC(SMB)]
1
In the initial Scan to Folder mode screen, press [Direct Input].
2
Press [PC(SMB)].
3
Specify settings for [Host Name], [File Path], [User Name] and [Password]
for the destination computer.
4
If necessary, press [Browse], and then browse to a shared folder to spec-
ify it.
5
Press [OK].
To specify multiple destinations, specify the various settings, press
[Next Dest.], and then specify the settings for the next SMB destina-
tion.
Specifying destinations
10-29
Advertisement
Table of Contents
