Table of Contents
Advertisement
5
Press [ON].
6
Press [OK].
7
Press the [Start (Color)] key or the [Start (B&W)] key.
A single proof copy is printed.
8
Check the proof copy.
If the proof copy was printed as desired, continue with step 9.
Using the keypad, the number of copies can be changed.
To print another proof copy, press [Proof Copy].
To change the settings, press [Cancel], and then perform steps 2
through 8.
9
Press [Print].
The remaining number of copies is printed.
[Separate Scan]
The scan operation can be divided into several sessions, for example, when
all pages of a document cannot be loaded into the ADF, and then the scanned
pages can be treated as a single copy job. In addition, the scanning location
can be switched between the original glass and the ADF during the scanning
operation.
Item
[ON]
[OFF]
[Separate Scan]
Description
Select this setting to perform a Separate Scan
operation.
Select this setting to not perform a Separate Scan
operation.
7-11
Advertisement
Table of Contents
