Setting Table - Potterton Gas condensing boiler Installation, Operation And Maintenance Manual

8.3 Setting table

Tab. 7: Setting the parameters
Function
Time and date
Hours/minutes
Day/month
Year
Start of summertime
End of summertime
Programming unit
This parameter is only visible in the room device!
Language
Info
Temporarily | Permanently
Contrast of display
Operation lock
Off | On
Programming lock
Off | On
Units
°C, bar | °F, PSI
Save basic settings
No | Yes
This parameter is only visible in the room device!
Activate basic settings
No | Yes
This parameter is only visible if a suitable standard setting is
available in the programming unit.
Use as
Room unit 1 | Room unit 2 | Room unit 3/P | Operator unit 1 | Opera-
tor unit 2 | Operator unit 3 | Service unit
This parameter is only visible in the room device!
Room controller 1 assignment
Heating circuit 1 | Heating circuits 1 and 2 | Heating circuits 1 and 3/P
| All heating circuits
This parameter is only visible in the room device, as the operating
unit in the boiler is fixed programmed for the operating device!
396532 05.11
- Not all parameters displayed in the display are listed in the setting table.
- Depending on the plant configuration, not all parameters listed in the setting ta-
ble are displayed in the display.
- In order to get to the setting levels: Enduser (Eu), Commissioning (C) and Engi-
neer (E), press OK button; after this, press and hold the information (i) button for
3 seconds, select the required level with the rotating knob and acknowledge
with the OK button.
Paramount three 30-115 kW
Programming
Prog. 1) Standard value
Level
no.
1 Eu 00:00 (h:min)
2 Eu 01.01 (day. month)
3 Eu 2004 (year)
5 E 25.03 (day.month)
6 E 25.10 (day, month)
20 Eu English
22 E Temporarily
25 E
26 E Off
27 E Off
29 Eu °C, bar
30 E No
31 E No
40 C Room controller 1
42 C Heating circuit 1
45