Multidevice Configuration - QSSC -310DA User Manual

Chapter 5 — Using the Client

Multidevice Configuration

Use the procedure below to configure OS specific managed devices on the server.
Redhat AS4.0
You are required to rebuild the initial ramdisk.
1. In /etc/modprobe.conf
options scsi_mod max_luns=xxx (whereas xxx is the number of LUNs to support)
2. Type the following to build the initial ramdisk and implement the changes:
mkinitrd -f /boot/newimage-2.6.xx 2.6.xx
sion)
3. Change the following:
boot/grub/menu.lst nitrd
To
boot/grub/menu.lst newimage-2.6.xx
4. Reboot the system.
After rebooting, the LUNs appear.
Redhat 9.0
1.
In the line
/etc/modules.conf
Add the following:
options scsi_mod max_scsi_luns=8
2. Reboot.
add the following line:
82
(whereas xxx is the exact kernel ver-