Rear View - QSSC -310DA User Manual

Chapter 1 — Introduction

Rear View

1. Power socket
2. PS/2 mouse
3. LAN port 1
4. Add-on Card Cover
5. Add-on Card Cover
6. LAN port 2
7. Rear ID LED / status
LED
8. VGA port
9. Serial port
10.
USB port
11.
12. PS/2 keyboard
Connect the power cable to the installed socket.
Connect a PS/2 pointing device to this port.
Connect an RJ-45 jack to this port to connect to a Gigabit Ethernet LAN or a second
server.
Remove these covers before installing an add-on card.
Connect an RJ-45 jack to this port to connect to a Gigabit Ethernet LAN or a second
server.
Supports IPMI interface.
•
Lights when ID button is pressed.
•
Displays status/errors
Connect a monitor to this port.
Connect serial devices to this port.
Connect USB devices to this port.
Connect a PS/2 keyboard to this port.
4