Replacing the DVD-ROM Combo
Refer to the following illustrations for instructions on replacing the DVD-ROM Combo unit:
Note:
The DVD-ROM Combo is an optional component and does not come as standard
with all SKUs.
1.
Remove the chassis cover. See Removing the Chassis Cover on page 12.
2.
Remove the screw securing the DVD-ROM Combo assembly to the chassis (1), and slide the assembly
back shown by the arrow (2).
3.
Lift the DVD-ROM Combo assembly, right-hand side first, from the chassis in the direction of the arrow.
25
Chapter 2 — Installing Hardware