Usb Configuration - QSSC -310DA User Manual

Chapter 3 — BIOS

USB Configuration

Scroll to this item and press Enter to view the following screen:
Advanced
USB Configuration
Module Version – 2.24.3-13.4
USB Devices Enabled:
1 Keyboard, 1 Mouse
Legacy USB Support
Port 64/60 Emulation
USB Functions
USB 2.0 Controller
►
USB Mass Storage Device Configuration
This menu enables you to configure USB devices.
USB Devices Enabled: displays USB devices currently detected.
Legacy USB Support: enables support for legacy USB devices. Select Auto to disable legacy support if no USB
devices are connected.
Port 64/60 Emulation: Enable and disable USB keyboard legacy support for non-USB aware operating systems.
USB Functions: enables and disables USB host controllers.
USB 2.0 Controller Mode: configures the USB 2.0 controller in HiSpeed (480Mbps) or FullSpeed (12Mbps).
Advanced
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay
Device#1
Emulation Type
USB Mass Storage Reset Delay: The
start Unit command is issued.
BIOS SETUP UTILITY
[Enabled]
[Disabled]
[Enabled]
[Enabled]
V02.61 ©Copyright 1985-2006, American Megatrends Inc.
BIOS SETUP UTILITY
[20 sec]
MITSUMI USB FDD
[Auto]
V02.61 ©Copyright 1985-2006, American Megatrends Inc.
Number of seconds that the POST waits for the USB mass storage device after the
40
Enables support for
Legacy USB. AUTO
Option disables
Legacy support if
no USB devices are
connected.
Select Screen
←→
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Number of seconds
POST waits for the
USB mass storage
Device after start
Unit command.
←→ Select Screen
Select Item
↑↓
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit