Using The Web Ui; Setting The Kvm Tcp Port On Network; Logging Into The Web User Interface - QSSC -310DA User Manual

The AST1000/2000 firmware features an embedded web server, enabling users to connect to the AST1000/2000
using an Internet browser (Microsoft Internet Explorer) without needing to install KVM and Virtual Storage soft-
ware on the remote console side PC.
The following web browsers are supported:
•
Internet Explorer 6 and 7
•
Mozilla 1.7.13 or later
•
Firefox 1.5 or later

Setting the KVM TCP Port on Network

The AST1000/2000 web user interface requires access to the system's TCP ports. Before using the web user inter-
face, ensure that the firewall settings are configured to allow access to the following ports: 8890 (KVM), 9000
(Storage), 9001, 9002, and 9003.
Note:
For information on configuring firewall settings to allow TCP port access, refer to
your firewall software user's guide.

Logging into the Web User Interface

Users must enter the AST1000/2000 embedded server IP address or URL into the address bar of the web browser
or connect using OEM customer's Embedded Server Management (ESM). The default IP address is
https://192.168.1.2/
When connecting to the AST1000/2000 using a web browser, SSL is automatically activated and the display user
login form is displayed prompting for the username and password. This authentication with SSL protection pre-
vents unauthorized intruders such as hackers from gaining access to the AST1000/2000 web server. If
authentication is passed, the user can manage the server by privilege. At the same time, the PHP (PHP Hypertext
Preprocessor) records all user information, including user ID and privilege.
The following figure displays the user authentication web page.
The default username is root. The default password is changeme.
50
Chapter 4
U s i n g t h e W e b
U s i n g t h e W e b
U I
U I