Chapter 4 — Using the Web UI
Locator Indicator
1. Click the Locator Indicator tab to view the following screen.
2. Click on the desired setting.
•
Turn system indicator LED on: set the system indicator LED on the remote server to blink.
•
Turn system indicator LED off: set the system indicator LED on the remote server to off.
•
System Indicator LED blink: set the blinking interval on the system indicator LED.
Fault LED
1. Click the Fault LED tab to view the following screen.
2. Click on the desired setting.
•
Turn fault LED on: set the fault LED on the server to blink.
•
Turn fault LED off: set the fault LED on the server to off.
58