Removing The Transfer Belt In The Lower Print Unit - Oce ColorStream User Manual

Removing the Transfer Belt in the Lower Print Unit

Removing the Transfer Belt in the Lower Print Unit

Attention:
Observe the safety directives in the
To Remove a Transfer Belt in the Lower Print Unit
#
Proceed as follows:
1. Prepare the original packaging of the soft transfer belt and place it next to the
printing system.
Caution
The inner sliding surfaces of the slide foils must be clean. Dirt on the sliding
surfaces can damage the soft transfer belt.
Wear the gloves provided in the packaging.
2.
3.
398 Chapter 9 - Replacing Expendables
'Replacing the Belt — Overview' on page 350
Carefully slide the sliding foil in
snugly between the transfer belt
and cover and push it around the
roller in the direction of the ar-
row.
Open the insertion tool.
section.