Changing The Is Mode Settings - Canon PowerShot N100 User Manual

Changing the IS Mode Settings

1
Access the setting screen.
z z
Press the <n> button, choose [IS
Settings] on the [4] tab, and then press
the <m> button
2
Configure the setting.
z z
Choose [IS Mode], and then choose the
desired option
Optimal image stabilization for the shooting conditions is automatically
Continuous
applied (Intelligent IS) (=
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
•
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Still Images Movies
(= 26).
(= 26).
35).
Shooting Movies with Subjects at the Same Size Shown
before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce significant camera shake.
z z
Follow the steps in "Changing the IS
Mode Settings"
[IS Settings] screen.
z z
Choose [Dynamic IS], and then choose
[2]
•
You can also set [IS Mode] to [Off], so that subjects are recorded at the same
size shown before shooting.
Movies
(= 85) to access the
(= 26).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
85