Using The < > Button; Registering A Smartphone To The < > Button - Canon PowerShot N100 User Manual

Using the < > Button
Once you have registered a smartphone or Image Sync
the < > button, you can connect to the registered destination simply by
pressing the < > button.
Registering a Smartphone to the < > Button
Once you have connected to a smartphone initially via Wi-Fi by pressing the
< > button, you can simply press the < > button after that to connect again
for viewing and saving camera images on connected devices.
1
Press the < > button.
2
Choose the destination.
z z
Press the <q><r> buttons to choose [ ],
and then press the <m> button.
(= 145) to
3
Establish the connection.
z z
Connect to the smartphone as described
in steps 5 – 9 in "Connecting to WPS-
Compatible Access Points" (=
steps 4 – 6 in "Connecting without an
Access Point" (= 135).
z z
After a connection is established with the
smartphone, the smartphone nickname
is displayed on the camera. (This screen
will close in about one minute.)
z z
You can now use the smartphone to
import images from the camera. (The
camera cannot be used to send images
to the smartphone.)
z z
Use the smartphone to end the
connection; the camera will automatically
turn off.
z z
From now on, you can simply press the
< > button to connect to the registered
smartphone.
Before Use
Basic Guide
Advanced Guide
130) or
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
143