Page 1
Sending still images and movies between two Canon-brand cameras (Wi-Fi function) (PowerShot N2)
Page 2
You can connect two cameras via Wi-Fi and send images between. NOTE • Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this method.
Page 3
NOTE When making Wi-Fi settings for the first time, a screen will appear for you to register a nickname for the camera. Touch inside the frame to access the keyboard, and then enter a nickname. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. 3.
Page 4
4. Drag your finger up or down on the screen to choose [Add a Device]. NOTE • Once a camera is added, the camera nickname will be displayed on the screen in step 4. To connect to a camera again, simply choose the camera nickname from the list. 5.
Page 5
6. Once both cameras are connected, a screen similar to the following one will be displayed. NOTE • Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by choosing the device.
Page 6
NOTE • You can choose the resolution (size) of images to send by touching [ ] on the image transmission screen. • Movies cannot be resized. 8. The following screen appears. After the image has been sent to the target camera and the [Transfer completed] message appears, return to step 7.
Page 7
10. The following screen appears. • Touching an image to send will label it with a [ ] icon. • To cancel selection, touch the image again. [ ] is no longer displayed. • If you move the zoom ring toward [ ], the camera will switch to single-image display.
Page 8
• [Transfer completed] is displayed after the image is sent, and the image transfer screen is displayed again. • To disconnect, touch [ ] in the upper right, and then touch [OK] on the confirmation screen.