Flash; Changing The Flash Mode - Canon PowerShot N100 User Manual

Flash

Changing the Flash Mode

You can change the flash mode to match the shooting scene. For details on
the flash range, see "Flash Range"
1
Raise the flash.
z z
Move the <h> switch.
2
Configure the setting.
z z
Press the <r> button, press the <q><r>
buttons to choose a flash mode, and then
press the <m> button.
z z The option you configured is now
displayed.
•
The setting screen cannot be accessed by pressing the <r> button
when the flash is lowered. Move the <h> switch to raise the flash,
then configure the setting.
[ ] Auto
Fires automatically in low-light conditions.
[h] On
Fires for each shot.
Still Images
(=
204).
[Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
•
In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 85).
• In [Z] mode, even after the flash fires, ensure that the main subject
does not move until the shutter sound is finished playing.
[ ! ] Off
For shooting without the flash.
•
If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
•
Adjustment is also possible by pressing the <r> button, touching the desired
option, and then touching it again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
83