Shooting With Camera-Determined Image - Canon PowerShot N100 User Manual

Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Shooting (Smart Auto)
1
Turn the camera on.
z z
Press the power button.
z z
The startup screen is displayed.
2
Enter [
z z
Set the mode switch to [4].
z z
Press the <m> button, press the
<o><p> buttons to choose [
then press the <m> button again.
z z
Press the <o><p> buttons to choose
[
z z
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
z z
Icons representing the scene and image
stabilization mode are displayed in the
upper left of the screen
z z
Frames displayed around any detected
subjects indicate that they are in focus.
Still Images Movies
] mode.
], and
], and then press the <m> button.
(= 34, 35).
3
Compose the shot.
z z
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle). (A zoom bar
Zoom Bar
showing the zoom position is displayed.)
4
Shoot.
Shooting Still Images
Focus.
z z
Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
z z
Several AF frames are displayed when
multiple areas are in focus.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
31