Changing The Is Mode Settings - Canon PowerShot SX400 IS User Manual

Changing the IS Mode Settings

Optimal image stabilization for the shooting conditions is
Continuous
automatically applied (Intelligent IS) ( = 32).
Image stabilization is active only at the moment of
Shoot Only*
shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
● If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Downloaded From camera-usermanual.com Canon Manuals
Still Images Movies
1
Access the setting screen.
● Press the [ ] button, choose [IS
Settings] on the [ ] tab, and then press
the [ ] button ( = 25).
2
Configure the setting.
● Choose [IS Mode], and then choose the
desired option ( = 25).
Shooting Movies with Subjects at the Same Size
Shown before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce significant camera shake.
● Follow the steps in "Changing the IS
Mode Settings" ( = 60) to access the
[IS Settings] screen.
● Choose [Dynamic IS], and then choose
[2] ( = 25).
● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
Before Use
Basic Guide
Still Images Movies
Advanced Guide
1
2
3
4
5
6
7
8
Index
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
60