Lens Retraction Timing; Using Eco Mode - Canon PowerShot N100 User Manual

Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press
the <1> button in Shooting mode (=
immediately after you press the <1> button, set the retraction timing to [0
sec.].
z z
Choose [Lens Retract], and then choose
[0 sec.].

Using Eco Mode

This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1
Configure the setting.
z z
Choose [Eco Mode], and then choose
[On].
z z
[
screen
23). To have the lens retracted
] is now shown on the shooting
(= 191).
z z
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
z z
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
154