Date And Time; Lens Retraction Timing; World Clock - Canon PowerShot ELPH 180 User Manual

Date and Time

Adjust the date and time as follows.
z z Choose [Date/Time], and then press the
[ ] button.
z z Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons
to adjust the setting.

World Clock

To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in "Setting the Date and Time"
1
Specify your destination.
z z
Choose [Time Zone], and then press the
[ ] button.
z z Press the [ ][ ] buttons to choose
[
z z Press the [ ][ ] buttons to choose the
destination.
z z To set daylight saving time (1 hour ahead),
choose [
and then choose [
buttons.
z z Press the [ ] button.
(= 13).
World], and then press the [ ] button.
] by pressing the [ ][ ] buttons,
] by pressing the [ ][ ]
2
Switch to the destination time
zone.
z z Press the [ ][ ] buttons to choose
[
button.
z z [ ] is now shown on the shooting screen
(=
• Adjusting the date or time while in [
update your [ Home] time and date.

Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press
the [ ] button in Shooting mode (=
immediately after you press the [
[0 sec.].
z z Choose [Lens Retraction], and then
choose [0 sec.].
World], and then press the [
97).
] mode (= 14) will automatically
19). To have the lens retracted
] button, set the retraction timing to
Before Use
Basic Guide
Advanced Guide
]
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
69