Installing The Cable; Switch Blind Installation - Star SP712 Series Hardware Manual

3-6. Installing the Cable

Install the cable as shown in the diagram below.

3-7. Switch Blind Installation

It is not necessary to install the switch blind. Only install it if it is necessary for you. By installing the switch blind, the
following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch blind as shown in the diagram below.
The power switch can be turned ON ( | ) and OFF (O) by inserting a narrow instrument (ball pen etc) in the holes in the
switch blind.
Important!
We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long
periods. Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and
easy to access.
– 11 –