Star SP712 Series Hardware Manual page 22

Tear Bar Model:
4
Tear off the paper as shown.
Auto Cutter Model:
If the printer cover is closed after turning on the power, the cutter operates automatically and the front end of the
paper is cut.
Note: When the paper end mark appears on the paper, replace the roll paper before it runs out.
4-2-1. Compliant Paper Roll Specifications
Paper type
Paper width
Thickness
• Single
• Copies
Roll diameter
Core
Note 1: Do not glue or tape the paper roll and shaft core together.
2: Do not fold the tail end of the paper.
Ordinary bond and carbonless copy paper
76±0.5 mm (3.0 inches)/57.5±0.5 mm (2.25 inches)/69.5±0.5 mm (2.75 inches)
0.06 mm to 0.085 mm
Original + 2 copies (Max. 0.2 mm)
85mm (3.35 inches) max.
12±1 mm (Inner dia.), 18±1 mm (Outer dia.)
– 18 –