Rx Band Filter Response; Tx Power Tuning - Nokia 2650 Service Manual

Nokia Customer Care
Press the Save&Continue botton
Note! You have to follow the shown procedure. It is not possible to tune the high band alone.
You need to make a tuning of the low band first to come to the high band. You can stop at any
time by switching off the menu. If the values are outside internal specs, you can not save them
and have to leave the tuning without saving.

RX Band Filter Response

Normally not needed in repair.

Tx Power tuning

Select Tuning, Tx Power Level Tuning
Press start and follow the instructions in the pop-up window
62
Figure 52:TX tuning
Figure 53:TX tuning
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
RH-53/54
Issue 2 06/2005