Nokia 2650 Service Manual page 156

RH-53/54
6-Disassembly and Assembly Instructions
7.) Make sure that the edges and the screw holes of
Domesheet and the Key Dome Shield are congruent to
each other.
7.) Remove the Key Dome Shield again.
Issue 2 06/2005 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
8.) Place the Key Dome Shield with the Domesheet on
the Engine Module exactly and press-on the Domesheet
carefully. Check if the Domesheet is correctly stuck to
the Engine Module.
8.) Press on the Domesheet carefully. Ensure also, that
there are no open edges or air gap.
Nokia Customer Care
13