Manual Settings - Nokia 2650 Service Manual

Nokia Customer Care
Choose "Next" to continue.
In the next dialogs you will be asked to select some settings for the connection.

Manual settings

A) For FLS-4S POS Flash Device choose following connection settings:
Media: FBUS
COM Port: Virtual COM Port used by FLS-4S. Please check this always!
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)
B) For FPS-8 Flash Prommer choose following connection settings:
Media: FPS-8
Port Num: COM Port where FPS-8 is connected
COMBOX_DEF_MEDIA: FBUS
Choose "Finish" to complete.
If you use the Wizard, connect the tools and a phone to your PC and the wizard will
automatically try to configure the correct connection.
Issue 2 06/2005
Company Confidential
 2005 Nokia Corporation.
Service Software Instructions
RH-75
Page 25