Nokia 2650 Service Manual page 153

Nokia Customer Care
28.) Unlock the snaps before removing the IHF Antenna
Chamber.
30.) Release the four hooks carefully by using the SRT-
6.
32.) Use tweezers when removing the Vibra Motor.
34.) Place the SRT-6 between LCD and the LCD Can as
shown in the picture and lever out the LCD carefully.
10 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
6-Disassembly and Assembly Instructions
29.) Remove the Antenna Chamber.
31.) Separate the C2-Cover from LCD CAN Assy.
33.) Open the LCD Connector by using the SRT-6 care-
fully.
35.) Release the four springs of Key Dome Shield.
RH-53/54
Issue 2 06/2005