Disassembly And Assembly Instructions - Nokia 2650 Service Manual

Nokia Customer Care
1.) Push down the Release Button before pulling the
Battery Cover.
3.) The Backplate is attached to the Hinge Spring with
two adhesive tapes. To avoid the snaps from breaking it
is important that the Backplate is at first lifted on the right
side referring to the "NOKIA" logo.
5.) A-Face Assy is attached with snaps to the B-Cover
Lower Block. Release the two snaps first.
6 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.

6-Disassembly and Assembly Instructions

2.) Open the unit and protect the Window with a plastic
film.
4.) Now, remove the Backplate adhesive. If necessary
clean the Backplate and the Hinge Spring before
attaching using new Backplate Adhesives.
6.) Shift the A-Face Assy from the B-Cover as shown in
the picture.
RH-53/54
Issue 2 06/2005