Midi Channel; Notice For Cf Card; Midi Implementation - Botex DC-136 User Instructions

•
Select mode100 or mode255 by UP/DOWN buttons.
•
Press "RECORD" to confirm your operation, use "ESC" to cancel or exit.

7. 7 MIDI channel

•
Enter the setting mode and choose 5. MIDI CH. , then press RECORD button to
enter the relevant further operation. LCD will show you:
•
Select relevant MIDI channels(1-16) by UP/DOWN buttons.
•
Press "RECORD" to confirm your operation, and use "ESC" to cancel or exit.

8 Notice for CF card

•
Do not pull out the CF card when being used.
•
Power must be assured "on", when reading or storing to CF card.
•
Turn off the power when connect or disconnect CF card with the unit.
•
CF card (32M) can be used only for DC-136, otherwise the data would probably be
missing.
•
Outputting of DMX would be stopped during the reading or storing to CF card. And so
does to "ASSIGN CH." mode.
•
CF card may become hot during use. Please observe due caution when removing
memory cards from this device.
•
Take good care of the CF card, and keep it in good conditions.

9 MIDI Implementation

This unit can receive and transmit MIDI NOTE information according to the relevant
channels. Please keep the following list for reference.
OK ESC CHANGE
MIDI CH. <××>
OK ESC CHANGE
14