Select Or Deselect A Par Scene / Chase; Select / Deselect A Par Scene; Select / Deselect A Par Chase - Botex DC-136 User Instructions

(3) Use UP or DOWN button to select the Chase Step to be programmed.
(4)
Set a scene for Chase recording.
(5)
Press the RECORD button, all LEDs will blink briefly, and LCD will show you the new
step.
(6) Pressing the DEL button can delete the current step, all LEDs will blink briefly.
(7) User can press ESC button to exit .

6.6 Select or deselect a PAR Scene / Chase

6.6.1 select / deselect a PAR Scene

(1) Press the PAGE button, its LED will be lit, you can select t scene page by UP/DOWN
button. PAGE:×× will be shown on the top left corner of the LCD-display.
(2) If the Scene LED is "on", that means the scene was programmed. While "off " means
unprogramed. Press the programmed Scene button to reactivate the PAR Scene.
(3) Pressing the scene button again can disable the related Scene.

6.6.2 select / deselect a PAR Chase

(1) Choose chase mode:
Press ONE/MIX/SEQ button to select the chase mode when no chase running. "off " LED
means "ONE" mode, "on" LED means "MIX" mode, and "flashing" LED means "SEQ"
mode. It would be ineffective when chase running.
(2) "ONE" mode:
Enter this mode, then press the programmed chase button, the relevant LED will light up.
The other running PAR chases will be closed.
close all the running chases when exit this mode.
(3) SEQUENCE mode:
In this mode, you should press the programmed chase buttons in turn to operate the
chases. The relevant LEDs will flash when chases are running.
Close all the running chases when exit this mode.
(4) MIX mode
In this mode, chases can run at the same time. The relevant LEDs will light up when
programs running. You should close all the running chases when exit.
(5) AUDIO
Press AUDIO button while chase running, the AUDIO LED will light up, that means you
have entered the "AUDIO" mode. FADE TIME will be useless, and the "TAP SYNC" LED
will flash according to the audio effect.
(6) STEP
Press "STEP" button, the relevant LED will blink briefly, and the chase will go forward for
ADD ESC STEP××
11