Access Control / Pin - FP Mailing Solutions Postbase Mailing System Operator's Manual

9.12

Access control / PIN

PostBase can be protected against unauthorized use via a PIN.
With the PC software, you can set up a user-specific access control for the PostBase.
Please refer to the manual of the PC software. In the PostBase menu, the PIN
function is then only accesible with the administrator PIN.
Advanced settings & system information
Enable access control
• Open the M .
ENU
• Choose M
ANAGE
• Confirm the prompt with C
PostBase opens the access control
adjustment menu.
• Enter a PIN and C
• Enter the PIN a second time to confirm.
• S the PIN.
AVE
The PIN is set. Each time you start up
PostBase, you have to enter it to get access.
Disable access control
Caution! If you disable access control, all
users will be deleted without prior warning.
• Open the M .
ENU
• Choose M
ANAGE
• Confirm the prompt with C
Access control is disabled.
P .
IN
.
ONTINUE
.
ONTINUE
P .
IN
.
ONTINUE
77