Step 2: Assembling Postbase - FP Mailing Solutions Postbase Mailing System Operator's Manual

16
PostBase Mailing System
Step 2:
Caution! When you move PostBase from a cold environment (i.e. below
10 °C / 50 °F): Unpack the PostBase and wait at least 2 hours before
connecting PostBase. PostBase requires this period to adapt to the ambient
conditions.
Assembling PostBase
• Choose an installation site with the
following ambient conditions:
– room temperature: 15 °C to 35 °C
(59 °F to 95 °F)
– no direct sunlight
– power socket in the immediate vicinity
– network connection with internet access
or
telephone socket for modem connection
in the immediate vicinity.
• Place PostBase on a firm, level, low
vibration and horizontal base.