Table of Contents
Advertisement
Stage Color LED
5. MOUNTING AND INSTALLATION
Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, or in
areas were the fixture might be reached by unauthorized personal.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
Before taking into operation for the first time,
the installation has to be approved by an expert.
When installing the device, make sure there is no highly
inflammable material within a distance of min. 0,5m
Mounting
The Stage Color LED™ is fully operational in any mounting positions, hanging upside-down
from a ceiling, side mounted, or set on a flat level surface (see illustration below). Be sure
this fixture is kept at least 0.5m (1.5') away from any flammable materials (decoration etc.).
When clamp mounting; always use and install a properly rated safety cable as an added
measure to prevent accidental damage or injury in the event of a clamp failure. See
illustration on page 11.
©Elation Professional, Los Angeles Ca.
9
www.ElationLighting.com
Advertisement
Table of Contents
