Safety Instructions - Elation Stage Color LED User Manual

2. SAFETY INSTRUCTIONS

1. Always be sure that the fan and the air inlets remain clean and are never
blocked. Allow about 6" (15cm) between this fixture and other devices or a wall
to allow for proper cooling.
2. Never touch the fixture during normal operation.
3. For safe operation, follow the Installation guide described in chapter two of this
manual. Operating the Stage Color LED™ without suited safety aids such as
safety cables or clamps can increase the risk of damage and/or personal injury.
4. Installation should only be performed by qualified and certified personal.
5. When mounting this fixture, use only the original rigging points included with
this fixture. Any structural modification will void the original manufactures
warranty and may increase the risk of damage and/or personal injury.
6. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.
7. Do not attempt to operate this fixture if the power cord has become damaged or
frayed.
8. Never open this fixture while in use.
9. This device falls under protection-class I. Therefore it is essential that the
device be grounded properly.
10. All electrical connections must performed by qualified personal.
11. Be sure the available voltage matches the voltage requirements of the unit. Be
sure the power cord is never crimped or damaged. If the power cord is
damaged, replace it immediately with a new one of similar power rating.
12. Always disconnect from main power before performing any type of service or
©Elation Professional, Los Angeles Ca.
To guarantee proper and consistent operation, it is important to
follow the guidelines in this manual. Elation Professional will not
accept responsibility for damages resulting from the misuse of
this fixture due to the disregard of the information printed in this
manual.
5
Stage Color LED
www.ElationLighting.com