Using Two Leslie Speakers; Reinforcing The Bass - Hammond B-3 Owner's Manual

USING TWO LESLIE SPEAKERS

Two Leslie Speakers may be connected to this organ.
Connect the first Leslie Speaker to the MAIN socket and the sec-
ond to the ECHO socket. The organ sounds are usually produced
from both Leslie Speakers. If you connect the MAIN/ECHO
switch, you can select which Leslie sounds while you are play-
ing.
To reinforce the bass, or if you do not wish to have the Pedals
speak through the Leslie, you can send the Pedal part directly to
a bass amp or PA system using the independent PEDAL OUT
jack. Set your PEDAL OUT preference by the OUTPUT param-

REINFORCING THE BASS

The sound that is input from LINE IN jack will be sent out to
both Leslie speakers regardless of the position of the MAIN/ECHO
switch.
eter of the OUTPUT on the PEDAL PART page in the SYSTEM
function mode. (P. 96 #1)
31
Hook-Up