Checks With The Engine Running; Dynamic Test With The Vehicle Running; Checks After Dynamic Test - Subaru 2004 FORESTER Service Manual

PRE-DELIVERY INSPECTION

Checks with the Engine Running

Step
26. Test mode connectors
27. Starting condition
28. Exhaust system
29. Indicator light
30. Clock
31. Radio
32. Front accessory power supply socket
33. Lighting system
34. Window washer
35. Wiper
36. Power window operation check

Dynamic Test with the Vehicle Running

Step
37. Brake test
38. Parking brake
39. AT shift control
40. Heater & ventilation
41. Air conditioner
42. Speed control

Checks after Dynamic Test

Step
43. ATF level
44. Power steering fluid level
45. Fluid leak check
46. Water leak check
47. Appearance check 2
Pre-delivery Inspection
Test mode connectors
Start the engine and check that the engine starts smoothly.
Check that the exhaust noise is normal and no leaks are found.
Check that all the indicator lights operate normally.
Check that the clock operates normally.
Check that the radio system operates normally.
Check that the front accessory power supply socket operates normally.
Check that the lighting systems operate normally.
Check that the window washer system operates normally.
Check that the wiper system operates normally.
Check the power window for correct operations.
Check that the foot brake operates normally.
Check that the parking brake operates normally.
Check the AT shift patterns are correct.
Check that the heater & ventilation system operates normally.
Check that the air conditioner operates normally.
Check that the speed control operates normally.
Check that the ATF level is normal.
Check that the power steering fluid level is normal.
Check for fluid/oil leaks.
Spray the vehicle with water and check for water leaks.
(1) Remove the protective coating (wrap guard).(if any)
(2) Check the body paints for damage and smears.
(3) Check the plated parts for damage and rust.
PI-4
Check point
Check point
Check point