29.CLOCK
Check the clock for normal operations and enough
accuracy.
30.RADIO
Check the radio for full functionality and normal
noise level. Also check the CD unit operations.
31.FRONT ACCESSORY POWER SUPPLY
SOCKET
Check the front accessory power supply socket op-
erations.
32.LIGHTING SYSTEM
• Check the headlight operations.
• Check the brake light operations.
• Check the other lights for normal operations.
33.WINDOW WASHER
Check that the window washer system injects
washer fluid to the specified area of windshield
shown in the figure.
Front injection position:
A: 350 mm (13.78 in)
B: 150 mm (5.91 in)
C: 275 mm (10.83 in)
D: 600 mm (23.62 in)
(A)
Pre-delivery Inspection
(A)
(B) (B)
(D)
(C)
WW-00107
Rear injection position:
A: 35 mm (1.38 in)
°
B: 72
(1) Nozzle
34.WIPER
Check the front and rear wipers for normal opera-
tions.
35.POWER WINDOW OPERATION CHECK
Manipulate the power window switches one by one
to check that each of the power windows goes up
and down with no noises.
36.BRAKE TEST
Check the foot brake for normal operations.
37.PARKING BRAKE
Check the parking brake for normal operations.
38.AT SHIFT CONTROL
1) Turn the ignition switch to ON.
2) Check that the select lever can not be moved
from "P" range when brake pedal is not depressed.
3) Check that the select lever can be moved from
"P" range when brake pedal is depressed.
4) Select the select lever to except "P" range.
5) Check that the ignition key can not be removed
from ignition switch when ignition switch is turned
to OFF.
PI-11
PRE-DELIVERY INSPECTION
(1)
A
B
PI-00081