Check Double Lock Operation; Check The Operation Of Child Safety Locks - Subaru 2004 FORESTER Service Manual

PRE-DELIVERY INSPECTION
2) Close the driver's door completely, and place the
door lock knob (A) to the lock position. Then pull in-
side door handles (B) to ensure that doors will not
open.
For other doors, place the door lock knob (A) to the
lock positions and then pull the inside door handles
to ensure that the doors will not open.
(B)
(A) Door lock knob
(B) Inside door handle
3) Press the driver's side power door lock switch to
lock side. Check that all doors including rear gate
are locked.
4) Press the driver's side power door lock switch to
unlock side. Check that all doors including rear
gate are unlocked.
Pre-delivery Inspection

6. CHECK DOUBLE LOCK OPERATION.

1) Fully open all the windows.
2) Remove the key.
3) Lock all the doors using the key or keyless trans-
mitter.
4) Verify that all the doors including rear gate are
not unlocked when pressing power door lock switch
to unlock side.
(A)
5) Verify that the door is not opened when operat-
ing door lock knob to unlock position and pulling in-
ner remote. Perform the same check for other
doors.
6) When the ignition key is turned to ON position in
double lock condition, confirm all doors are re-
leased from double lock and then all doors and rear
gate is unlocked.
PI-00004 7. CHECK THE OPERATION OF CHILD
SAFETY LOCKS
1) Set the child safety lock on both rear doors to the
lock positions.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock positions. Then, pull the inside door han-
dles of the rear doors to ensure that the doors will
not open.
4) Next, pull the outside door handles of the rear
doors to ensure that the doors will open.
PI-00074
PI-00107
PI-6
(C)
(A)
(B)
(A) Unlock
(B) Lock
(C) Child safety lock
PI-00084