Appearance Check; Tire Check; Fuse Installation; Connection Of Air Conditioner Harness - Subaru 2004 FORESTER Service Manual

1. APPEARANCE CHECK

1) If the vehicle is covered with protective coating,
visually check the vehicle body for damage and
dents.
2) If there is no protective coating, check the body
paints for small areas of damage or stains and re-
pair as necessary.
3) Check the window glass, door glass, and lights
for any cracks or damage and repair or replace the
parts as necessary.
4) Check the plated parts, such as the grilles and
door knobs, for damage or loss of gloss and repair
or replace the parts as necessary.

2. TIRE CHECK

• Check the tire outer faces for any damage.
• Check the tire air pressure by referring to the fol-
lowing table.
Tire size
205/70R15
215/60R16 200 (2.0, 29)
P215/60R16

3. FUSE INSTALLATION

A vehicle just delivered has no fuse for the room
lamp circuit to prevent battery discharge. Attach a
15 A fuse (A) as shown in the figure.
Pre-delivery Inspection
Tire inflation pressure
2
kPa (kg/cm , psi)
Front Rear
190 (1.9, 28)
(A)
PI-00001
4. CONNECTION OF AIR CONDITIONER
HARNESS
A vehicle just delivered has its air conditioner har-
ness disconnected to protect the air conditioner
compressor. Connect the harness as shown in the
figure.
5. CHECK THE DOORS FOR LOCK/UN-
LOCK AND OPEN/CLOSE OPERATIONS.
1) Using the key, lock and unlock the door several
times to check for normal operation. Open and
close the door several times for smooth movement.
(A)
(A) Unlock
(B) Lock
PI-5
PRE-DELIVERY INSPECTION
PI-00002
(B)
PI-00070