Intek HT-446S Instruction Manual page 7

To remove the battery
1
2
Warning !
Please do not waste used batteries into the environment and do not trash them with the common
garbage. Please use the dedicated case for the collection of used up batteries at your supplier.
Do not attempt to open or remove the battery casing.
Do not short the battery terminals or throw the used batteries into fire.
To install / to remove the belt clip
Preliminary Steps
To remove the battery pack, press the battery lock on the radio (item 1) and
push back the battery pack, as showed in the drawing (item 2).
If necessary, attach the belt clip to the tranceiver, making it slide along the
fit runner placed on the rear side of the battery untill the lock will hook. To
remove the belt clip press the lock and slide the belt clip away from
the battery.
- 5 -