Correcting The Printing Position; Using The Correcting The Printing Position Utility - Epson PP-100AP User Manual

1. Make sure that an unprinted disc is inserted in Stacker 1.
2. Make sure that no lights are indicating errors, and that the disc cover is closed.
3. Access the printer driver.
See "Accessing the printer driver" on page 17.
4. Click the Utility tab, then click the Print Head Alignment button.
5. Follow the on-screen instructions to align the print head.
Caution:
c
❏ By entering value at confirmation screen after initial adjustment, adjustment will be done
using the initial value and entered value added together. To clear adjustment value,
select Reset and click Exit.
❏ If the label printing surface is not aligned with center of the disc after aligning the print
head as described above, print will appear out of alignment compared to printing surface.

Correcting the Printing Position

If you notice a misalignment of vertical printing position, you may be able to solve this
problem by using the Correcting the Printing Position utility in your printer driver.

Using the Correcting the Printing Position utility

Follow the steps below to adjust the vertical and horizontal printing position using the
Correcting the Printing Position utility.
1. Make sure that a dummy disc or blank is inserted in Stacker 1.
2. Make sure that no lights are indicating errors, and that the disc cover is closed.
3. Access the printer driver.
See "Accessing the printer driver" on page 17.
4. Click the Utility tab, then click the Correcting the Printing Position button.
5. Follow the on-screen instructions to adjust the vertical and horizontal printing position.
Maintaining Your Product
68