Correcting The Printing Position; Using The Correcting The Printing Position Utility; Cleaning Your Product; Cleaning The Exterior Of The Product - Epson PP-100 User Manual

3. Access the printer driver.
See "Accessing the printer driver" on page 14.
4. Click the Utility tab, then click the Print Head Alignment button.
5. Follow the on-screen instructions to align the print head.

Correcting the Printing Position

If you notice a misalignment of vertical printing position, you may be able to solve this
problem by using the Correcting the Printing Position utility in your printer driver.

Using the Correcting the Printing Position utility

Follow the steps below to adjust the vertical and horizontal printing position using the
Correcting the Printing Position utility.
1. Make sure that a dummy disc or blank with a 116 mm (4.57") or more outside diameter
is inserted in Stacker 1.
2. Make sure that no lights are indicating errors, and that the disc cover is closed.
3. Access the printer driver.
See "Accessing the printer driver" on page 14.
4. Click the Utility tab, then click the Correcting the Printing Position button.
5. Follow the on-screen instructions to adjust the vertical and horizontal printing position.

Cleaning Your Product

Cleaning the exterior of the product

To keep your product operating at its best, clean it thoroughly several times a year by using
the following procedure.
In case of SPC, use <Hasei> parts. New :Inkjet Only.
Maintaining Your Product
61